Many car owners are not satisfied with their car headlights, or the headlights have been used for a long time and need to be replaced. At this time, car headlight modifications are often needed. Of course, more importantly, out of consideration for safe driving at night, more and more car owners have joined the ranks of car headlight modifications. If replacing the headlight assembly is a bit expensive due to cost considerations, it is very common to just modify LED headlights. Of course, it also includes modifications to halogen headlights and xenon headlights. Today we will talk about the specific modification methods. and precautions.
The low beam of the original car: the brightness is low and there is no cutting line that the low beam should have; especially when driving without street lights and at high speeds, how can we protect our lives?
The original car’s high beam: The high beam is also very poor; only upgrading and modifying a set of bifocal lens xenon lamps is the wisest choice!
Now we start to modify the car lights!
Prepare the test equipment and conduct the effect test!
(1) After determining the model, it is best to turn off the vehicle, remove the car key, and wait for the engine to cool down completely before starting to replace the headlights.
(2) Open the engine hood and simply replace the big bulb. Generally, it is not necessary to remove the headlight assembly. The fixing methods of the headlights of different cars are slightly different. Generally speaking, there will be a dust cover at the rear of the headlight. Tighten it firmly. After opening, you can see the steel wire circlip of the headlight. You can take out the headlight by pinching it hard.
(3) After taking out the bulb, you can unplug the bulb from the power interface. Do it gently to avoid damaging the power interface.
(4) Take out the new light bulb from the product packaging box. Remember not to touch the glass part of the light bulb with your fingers to avoid accidentally touching the glass with your hands and affecting its service life. It is best to wear gloves when operating, and Install the light bulb into the power socket.
(5) Finally, fix the bulb on the steel wire circlip and screw on the sealing cover.
A sharp comparison picture before and after low beam upgrade and modification:
The upgraded high beam: has a wide irradiation range and a long range, and can bring us good light at night!
A sharp comparison picture before and after the high-beam upgrade and modification:
overall effect
As the eyes of the car, modifying the headlights will not only affect you, but may also affect the driving of other cars. Therefore, modifications need to be done with caution, and safety is king.