How to repair a car lampshade and make it look like new for just Rs 2,000. The master believed in his skills and promised a two-year guarantee on the quality of the restoration. Next, we will follow the footage and learn how to repair car headlights.
The headlight of this car had a broken hole, and the entire headlight was oxidized and turned yellow. In China, almost no one wants such a lamp. The maintenance master named Kadani opened a small shop of less than 20 square meters on this small street. He used a screwdriver to separate the lampshade from the lamp body. It can be seen that the reflective material of the lamp body has fallen off because the lampshade is severely oxidized.
Next, you need to clean the lampshade with baking soda water and wipe it clean with a foot rag. Then, you need to deal with the damage to the lampshade.
Use a screwdriver to mark the rough outline of the cut to reduce the repair area. Then, use a heated screwdriver to ream the hole in the lampshade to ensure a successful repair. Although the tools are rudimentary, Kadani has succeeded in this small street with his superb skills and high-quality repairs. He even began to consider marrying a Bai Fumei.
After the lampshade hole is cut, you need to use a staggered knife to smooth the burrs on the surface of the hole to make the lampshade repair more beautiful.
After the sanding is completed, you need to find an old piece of acrylic board to repair. Use glue and finely ground plastic particles to stick the patch on the surface, then turn the lampshade over and use a razor blade to mark out the cut shape.
Next, you need to use a grinder to cut the painted marks. After cutting out the rough outline, you need to compare it with the lampshade and make slight adjustments until the size is right.
After completion, the patch needs to be installed on the lampshade, and the gap between the patch and the lampshade is filled with plastic powder, and then glue is dripped on the surface of the gap and filled multiple times to form a transparent plastic body.
Next, you need to use a wrong knife to smooth the pasting surface.
If this maintenance technology is introduced into the country, many automotive lamp factories will face the risk of bankruptcy, because the surface of the lampshade is severely oxidized and yellowed, and needs to be scraped with a utility blade to quickly remove the oxide layer on the surface. There is no skill in this scraping method. You just need to master the strength and angle, and you can handle it easily.
When it comes to maintenance work, sometimes some whimsical ideas can bring unexpected results. Next, you need to use fine sandpaper and water to perform fine, slow and detailed sanding. When it comes to maintenance work, there is nothing that cannot be repaired, only people who cannot repair it.
After sanding is completed, you need to carefully wipe the surface and interior of the lampshade with a rag.
Next, the lampshade needs to be polished using a polishing machine and polishing wax.
After completion, the reflective mesh on the lamp body needs to be processed.
First, you need to apply a layer of headlight repair fluid on the surface, and then stick it on the surface with tin foil. Because the reflective material of the lamp tube has fallen off, the reflective ability is reduced and the light cannot be collected. →After completing the repair, you need to apply the sealant evenly, and then use a flame gun to heat the inside and outside to make the lampshade and lamp body fit perfectly.
→After fitting together, use a clip to clamp the edge of the headlight and heat it with a flame gun again to improve the sealing of the headlight.
This is where Cardani's confidence in their restoration products comes from, they rigorously consider every detail and work with meticulous care.
→In order to improve the beauty of the headlights, they need to be sent to a polishing machine for re-polishing.
After polishing, the car headlights look brand new without any traces of repair, which can sell for a higher price.
