@Everyone can popularize science, there is new knowledge everywhere
The rear taillight does not light up when the car is driving, which is very troublesome for the driver. What should be done? Can we solve it ourselves?
We first need to check whether the filament of the car's rear taillight is burned out and replace the rear taillight bulb. Check whether the rear taillight has a bad grounding. Repair the rear taillight grounding. Check whether there is an open circuit in the rear taillight circuit. Use a multimeter or a test light to check the open circuit part and connect it properly.
How to remove and install car rear taillights?
1. Remove the clip holding the rear taillight in the trunk.
2. Take off the three fixing screws of the rear taillight.
3. Take a photo of the rear taillight with your hand along the direction of the rear taillight.
4. Unplug the rear taillight wiring harness plug.
5. Inspect and replace.
6. Install the wiring harness plug.
7. Firmly snap the rear tail light into the buckle.
8. Install the three fixing bolts.
9. Tighten the bolts and install the buckle.
Today I will share how to deal with the problem that the rear taillight of the car does not come on. Do you understand it?
Gemdale shares more experiences about car ownership.
If you like it, remember to like, comment, collect and forward.
