There once was such a true story,
When driving normally, the other party's headlights were on and blinded me.
So I used my flashing light to remind the other party,
But when we met, the other person rolled down the window and said:
"I'm on low beam right now."
In my mind: "Fuck, you can't turn it down?"
Of course, it’s best to use civilized language to solve problems.
Many people use violence to solve problems.
In order to avoid meeting violence with violence,
Today we will talk about: how to adjust the height of the headlights!
First, you need to know:
If the headlights are too high, there is no difference from turning on high beams.
Therefore, the situation that appeared at the beginning of the article may occur,
Even if you flash the light, the other party will remain indifferent.
How can it be changed if the headlights are already on low beam?
Turn off the headlights? Wouldn't that be more terrifying?
So how can you correctly judge whether the height of your car's headlights is appropriate?
First choose at night or in a dark environment in the basement.
Make sure the ground is level, otherwise there will be errors in the adjustment results.
Then keep a distance of 8 meters between the front of the car and the wall and turn on the lights.
In addition, the height of the headlights is generally parallel to the headlights.
If possible, you can use a ruler to measure its position.
Then just find the corresponding position on the wall.
Of course, if there are no conditions, we can also judge by the person's height.
(for reference only)
Find one with a height of 175cm and illuminate it with low beam.
If the light source is above the person's hips,
We need to adjust downward,
If the light source is below the person's knees,
We need to adjust upward.
Note that the adjustment through the buttons in the car is a synchronous adjustment of the left and right headlights.
If your headlights are of different heights,
Then you need to open the hood and use tools to complete it.
How to adjust headlights while driving?
Take the rear of the vehicle in front, which is about 8 meters away, as a reference.
Turn on the car lights so that they do not illuminate the rear windshield.
The minimum recommendation is the seam between the trunk and rear bumper.
In addition, many people say that there is a simple reference for Shangxia,
So how to adjust the left and right width of the light?
Here to remind everyone,
Since the car is already set at the factory,
It is recommended that you do not adjust it.
If you have to adjust the width of the light, it is recommended that you go to a professional store for adjustment.
Write at the end:
Brother Fei also told everyone before that high beams are actually very harmful.
As for some of the anti-glare baffles I bought, they are of no use.
The most effective thing is when someone flashes the light to remind you,
We turn high beam into low beam!
Of course, not everyone is good at quality.
Therefore, there are a lot of high beam lights on the road.
There is a saying that goes, "If a dog bites us, we can't bite the dog again."
If there is a problem with your own car lights, we can handle it ourselves.
While achieving quality,
It can also avoid being cheated at the 4S store due to the problem of the height of the car lights.
