To be honest, the halogen headlights of the original car are really crazy. Recently, a friend gave me an LED light, specially for Weilan. I took advantage of my Saturday vacation to install it myself. The specific installation steps are as follows. Don’t ask me how much. I bought it with money, because I didn’t buy it but it was a gift from a friend.
Turn the dust cover counterclockwise and use a little force, then take a screwdriver and pull out the dust cover.
Open the dust cover, find the base of the light bulb inside, and continue to turn it counterclockwise. Just turn it a little, because there is a hidden groove inside.
This is the LED light to be installed and the large halogen bulb to be removed
Sub-parameters of the original car's large halogen bulb, 55 watts. . . . . . No matter what, I have to get a 200-watt light bulb. In my old life, I had a 50-watt light bulb. Can I still see?
The true face of Lushan Mountain
small led light
Remove the original big light bulb from the wire
Find the wires of the LED light, positive and negative
Insert the two wires of the LED control box into the base and see clearly the positive and negative poles
Let’s talk about the connection between the two wires of the LED light and the control box.
After the link is completed, first check whether the car light is on, and then insert it into the headlight bowl. Pay special attention to the position pointed by the big female finger in the photo, otherwise it will not be aligned with the light bowl.
Insert the lamp bowl and align it, then turn it clockwise, which is the opposite of the rotation when it was removed. If you look closely, you can clearly see that the three ears of the LED light are pressed against the three ears of the lamp bowl.
The effect of turning on the lights during the day (why doesn’t the middle part light up? Let’s wait and see at night)
When the headlights light up, the form immediately improves.
By the way, upload the reading light in the car, it has just been installed.
The front fog lights that have not yet been installed, the eyebrow line version, you have to remove the front bumper to install it, it is not easy to install.
High beam effect picture, low beam is not taken, low beam is almost the same as high beam.
High beam effect picture, low beam is not taken, low beam is almost the same as high beam.
Some friends asked me about the model and manufacturer of LED lights. Please see this photo of LED lights.
Pictures and texts are reprinted