The lights on the car are very important. They not only provide lighting for the driver, but also serve as reminders for other vehicles. But if the car's lights are accidentally adjusted, how should it be adjusted and restored?
How to adjust car lights?
There are three ways to tune your car. Different car models have different adjustment methods. You need to choose the right method to adjust it for your car model.
1. There is a button to adjust the headlight height in the car
Nowadays, most vehicles have buttons for adjusting the headlights, which can be adjusted through this function key. Usually there are 4 lights. High gear. You can adjust it as needed.
2. Manually adjust the fine-tuning button of the headlight assembly
Most previous models required the use of micro-adjustment buttons to manually adjust the lights and required the hood to be opened. Find the fine adjustment button to adjust the light inside to make adjustments.
3. Automatic horizontal height adjustment
This kind of headlight is usually used in high-end luxury cars and does not require the driver to manually adjust it. The lighting system will automatically adjust based on signals fed back by relevant sensors. Adjust the height of the headlights.
How to restore headlights after they are messed up
1. It is necessary to drive the vehicle about 8 meters away from a wall at night and turn on the headlights of the vehicle.
2. You need to use an opaque thick cloth to cover the left car light and see if the height of the right car light is similar to the height specified in the vehicle model's manual.
3. If the car lights on the right side are in normal condition, you need to use chalk, stickers and other items to mark the center of the lighting range.
4. Open the thick cloth of the left car light and cover the right car light. You'll need to use chalk, stickers, and other items to mark the center of the light range.
5. Check the center marks of the left and right car lights, regardless of whether the right side is 10cm higher than the left side. If the height is not 10 cm higher, you need to fine-tune the left and right lights. Until the light on the right is 10cm higher than the light on the left